Saftety Features

"The Hi-Lift Jack has a rated capacity of 4660lb (2114kg). The ASME/ANSI B30.1-1992 required that the jack have a 150% safety factor times the rating requirement. In fact, every Hi-Lift Jack comes standard with a shear bolt which will shear and not allow the jack to be used on loads greater that 7000lbs (3175kg) capacity. ASME/ANSI tests, and many years of manufacturing, sales and technical experience have proben that 7000lb (3175kg) is a safe maximum limit for operation of this type of jack. Some imitators offer a jack with an 8000lb capacity up to only 12 inches on the bar."

The Only All-Cast Jack

"The Hi-Lift Jack Company offers the only all-cast jack manuractured in the world today. This hack is manufactured from high yield and tensile strength iron castings, the same durable metal that has been used for over 100 years."

Two Models Available

"We offer both the all-cast jack and the cast and steel jack. The cast and steel hack is exactly the same as the all-cast jack except that it has 4 stamped high-strength steel parts. Only Hi-Lift Jacks are made with a two piece handle and socket design that is built for extended life. Cheaper imitations use a one-piece design that bends easily if lateral pressure is applied while lifting a load."

The Top Winch Connector-Clamp Advantage

"Every Hi-Lift Jack comes complete with a top winch connector-clamp. The top winch connector-clamp is essential for performing the wide variety of tasks of which the jack is capable. To our knowledge, ours is the only mechanical jack that offers the top winch connector-clamp as standard equipment."

(taken from the original Hi-Lift Jacks brochure)