Easy Installation (no upper control arm drop, no relay rod replacement)

One-piece MIG welded and reinforced subframe

CNC-machined cast spindles with high strength alloy CNC-turned axles

New front coil springs

Bolt-on system, no welding or cutting required

New O.E. quality front brake lines

Heavy duty fasteners and hardware

Rear riser blocks with heavy duty U-bolts

Allows full alignment to O.E. specifications

No exhaust modifications required

Extended sway bar end links, front and rear

Note: This system was developed using 15 x 8 wheels with 3" backspacing and 32x11.5OR15 tires. It is Possible that some Suburban O.E. wheels may be used with this kit. Be sure to check for adequate wheel and tire clearance through the entire range of suspension travel