Every owner of WARN low-profile winches with Series WoundTM motors is a candidate for the most robust and reliable control pack possible. It replaces the electro-mechanical solenoid and uses no moving parts to control the Power In, Power Out and Step functions of the winch.

The MOSFET module is sealed to resist any water and contaminate infiltration. A thick aluminum cover adds durability and heat resistance. Available in 12 and 24 volt versions with choices of two battery lead lengths, the M.O.S.F.E.T. CONTROL can be mounted on the winch or in another location, such as the engine compartment.

PN 65319
For 12V system. Includes tie-rod mounting bracket, 72"(1.83m) battery power leads and 6" (15.2cm) leads from control box to winch. Allows for mounting of control box to winch.

PN 65320
For 24V system. Includes tie-rod mounting bracket, 6' battery power leads and 6" (15.2cm) leads from control box to winch. Allows for mounting of control box to winch.

PN 65429
For 12V system. Includes tie-rod mounting bracket, 72"(1.83m) battery power leads and 72"(1.83m) leads from control box to winch. Allows for mounting of control box to remote location.

PN 65429
For 24V system. Includes tie-rod mounting bracket, 72"(1.83m) battery power leads and 72"(1.83m) leads from control box to winch. Allows for mounting of control box to remote location.