The
9.5ti Multi-Mount packs 9500lbs of portable pulling
capacity into a massive 12.5lb aluminum die-cast
body. The new shape not only looks great, but sheds
the elements like no other winch on the market:
seals at the key points give extreme-duty water
resistance. A Gen II Bosch motor delivers just the
right balance between torque and speed. Plus another
Warn Industries first - operator feedback - the
thermometric indicator gives the operator information
about motor temperature during the winching operation.
The
9.5ti Multi-Mount includes winch, ti remote, carrier,
7.5' power lead with quick connect plug for front
of vehicle and hawse fairlead. Front receiver and
rear power lead sold separately.
| 9.5ti
MULTI-MOUNT™ SPECS/PART NUMBERS |
| Part
Number: PN 65735, PN 67912 for the
H2 Hummer |
| Rated
Line Pull: 9500 lbs. (4310 kgs) single-line |
| Motor: Gen
II, Series WoundTM |
| Remote
Control: Remote switch, 12' (3.7m)
lead |
| Geartrain: 3-Stage
Planetary |
| Gear
Ratio: 156:1 |
| Lubrication: Aeroshell
#17 |
| Clutch
(freespooling): Sliding Ring Gear |
| Brake: Automatic
Direct Drive Cone |
| Drum
Diameter/Length: 2.5"/9.0" (6.4cm/23cm) |
| Weight: 112
lbs. (51 kgs.) |
| Wire
Rope: 125', 5/16" diameter (30m,
8mm diam.) |
| Fairlead: Hawse |
| Recommended
Battery: 650 CCA minimum for winching |
| Battery
Leads: Front heavy-duty 7.5'/2.2m
with quick connect plug |
| Finish: Chromate
with High-gloss Powder Coat |
|
